- Home
- Electronics & Semiconductors
-
Ultraviolet Disinfection Equipment Market
Ultraviolet Disinfection Equipment Market By Application Water & Wastewater Treatment, Air Treatment, Surface Disinfection, Component Type (UV lamps, Ballasts/Controller Units), End User Municipal, Residential, Commercial, Industrial – Partner & Customer Ecosystem (Product Services, Proposition & Key Features) Competitive Index & Regional Footprints by MarketDigits - Forecast 2024 – 2032
Industry : Electronics & Semiconductors | Pages : 180 Pages | Upcoming : Jun 2024
The estimated value of the Global Ultraviolet Disinfection Equipment Market was USD 3,629.3 million in 2022. It is projected to grow at a compound annual growth rate (CAGR) of 6.9% from 2023 to 2030. The increasing demand for ultraviolet (UV) disinfection equipment in healthcare organizations is expected to drive the growth of the industry. However, the COVID-19 pandemic has caused disruptions in the supply of this equipment and its components. Manufacturers are unable to meet the rising demand and have reached their maximum production capacity. Expanding their manufacturing facilities to address the growing demand from end-users is not feasible in a short period.
UV air purification is a well-established technique recommended by organizations such as the WHO and CDC for use in laboratories, hospitals, operating rooms, and educational institutions. UV air purifiers are also suggested for improving air quality in residential and commercial settings by eliminating particulate matter and dust, which is believed to reduce the transmission of the coronavirus.
Due to the increasing number of COVID cases, many hospitals have started implementing UV systems to disinfect high-risk indoor environments. This is expected to drive the demand for UV disinfection equipment in the coming years. Compared to sodium hypochlorite and chlorine gas, UV disinfection systems have a lower environmental impact since they primarily rely on the electrical grid's composition.
Public health agencies have recognized UV disinfection systems as an effective method for treating drinking water, reclaimed water, and wastewater. As a result, countries worldwide are adopting these systems to conserve water resources, meet sustainability goals, and eliminate the need for toxic chemicals.
Component Type Insights
In 2022, the UV lamps segment held the largest market share with a revenue contribution of 36.9%. UV lamps, including low-pressure bulbs, are commonly used in applications with low flow rates and longer exposure durations, while amalgam lamps are preferred in commercial applications for their effective microbial contamination removal. The increasing demand for UV lamps is expected to drive the expansion of the industry.
Quartz sleeve fouling occurs due to the accumulation of magnesium, algae, calcium ions, and an iron layer caused by poor equipment maintenance. According to the US EPA wastewater technology fact sheet, quartz sleeves are expected to last up to 8 years but are typically replaced after five years, leading to a rise in product demand.
Reactor chambers are projected to experience a steady compound annual growth rate (CAGR) of 6.4% from 2023 to 2030. These chambers offer high flow capacity despite their compact size, easy installation, and low head losses of less than 0.5 meters. These advantageous features are anticipated to drive industry growth.
Electronic ballasts are constructed using various electronic components that collaborate to generate a power supply. These ballasts can deliver up to 50,000 pulses per second of electrical current. Compared to magnetic ballasts, electronic ballasts are known for their efficiency, lightweight design, and compact size, which are expected to drive the demand for UV disinfection equipment.
Application Insights
In 2022, the water and wastewater segment emerged as the market leader, contributing 48.1% to the global revenue share. The rapid industrialization in developing economies has led to increased water pollution, creating a demand for clean and safe drinking water due to the growing population. This is expected to drive the demand for UV disinfection equipment.
Educational facilities, often located in densely populated areas, face air pollution from various contaminants in both indoor and outdoor spaces. To combat the spread of the coronavirus and reduce indoor air pollution, many schools and educational institutions have started adopting air purifiers, including UV disinfection systems.
Since the outbreak of COVID-19, there has been an increased demand for processed fruits and vegetables. Consumers have been visiting retail stores to stockpile these products. Recognizing the higher risk of exposure to respiratory pathogens in closed environments, retail store owners are increasingly employing UV air disinfection systems.
Poor indoor air quality leads to various health issues, such as allergies and asthma, affecting both breathing and overall well-being. UV air purifiers utilize UV-C light to deactivate microorganisms and airborne pathogens like viruses, bacteria, and molds, addressing these concerns.
In terms of end-use, the municipal segment dominated the global UV disinfection equipment market in 2022, accounting for a revenue share of 41.2%. This is attributed to the increased adoption of UV disinfection in water and wastewater treatment plants in developed countries. Municipal wastewater treatment plants are shifting towards UV disinfection solutions due to their cost-effectiveness, safety, and environmental friendliness compared to conventional technologies.
Growing consumer awareness of air pollution and the prevalence of airborne diseases has compelled manufacturers to invest in green technologies worldwide. Consequently, manufacturers are incorporating technologies such as filtration, UV disinfection, and photocatalytic purification to combat all sources of air pollution.
In emerging nations, industrial activities and urbanization have led to environmental degradation caused by untreated or inadequately treated industrial wastewater effluents. UV disinfection offers a chemical-free solution for effectively treating all types of microbes, driving the demand for UV disinfection in industrial wastewater treatment.
UV decontamination tunnels and UV surface disinfection conveyors are gaining popularity for reducing microbial contamination on the surfaces of food items, packaging materials, medical equipment, and medicines. This trend is projected to increase the demand for UV disinfection equipment across various industrial applications.
Regional Insights
In 2022, North America emerged as the leader in terms of revenue share, accounting for over 32.2% of the market. The increasing investments in the pharmaceutical, chemical, food & beverage, and automotive sectors in the United States and Canada are expected to drive the demand for wastewater treatment and, consequently, UV disinfection equipment during the forecast period.
Europe is considered one of the most polluted regions globally due to the growth of industrialization and urbanization. The thriving automobile industry, favorable industrial regulations, and regional economic growth are among the key factors driving the demand for air purification products in the region.
China is anticipated to experience significant growth in the demand for water and wastewater treatment products during the forecast period. This is primarily due to the country's emphasis on municipal and industrial water management. Researchers in China are prioritizing the optimization of existing recycling technologies and the development of innovative recycling systems.
Central & South America has witnessed increasing pollution levels and a higher frequency of airborne diseases, leading to heightened consumer awareness and a rise in demand for air purification products. Domestic investments in the water treatment sector are expected to positively impact the regional market during the forecast period.
In light of the COVID-19 outbreak, major manufacturers are focusing on product innovations and technological advancements to meet the growing demand for UV technology-equipped devices. For instance, GermFalcon has developed a UV-C light system specifically designed for airplanes, capable of disinfecting a 30-row aircraft in under three minutes. Puro is supplying UV-C light to New York City transportation services for cleaning subway cars and buses.
Manufacturers are also engaging in strategies such as mergers and acquisitions to strengthen their presence in the global market. Some notable participants in the global ultraviolet disinfection equipment market include:
• Xylem
• Trojan Technologies
• Halma PLC
• Calgon Carbon Corp.
• Atlantic Ultraviolet Corp.
• Evoqua Water Technologies LLC
• Advanced UV, Inc.
• American Ultraviolet
• Atlantium Technologies Ltd.
• Dr. Hönle AG
• Lumalier Corp.
• Xenex
• ENAQUA
• S.I.T.A. Srl
• Hitech Ultraviolet Pvt. Ltd
Global Ultraviolet Disinfection Equipment Market Report Segmentation
The revenue growth of the global ultraviolet disinfection equipment market is projected and analyzed in this report at the global, regional, and country levels. It also provides insights into the industry trends within each sub-segment from 2018 to 2030. Grand View Research has conducted segmentation of the global ultraviolet disinfection equipment market report based on product, end-user, and region for the purpose of this study.
End-use Outlook (Revenue, USD Million, 2018 - 2030)
• Municipal
• Residential
• Commercial
• Industrial
Application Outlook (Revenue, USD Million, 2018 - 2030)
• Water & Wastewater Treatment
• Air Treatment
• Surface Disinfection
Component Outlook (Revenue, USD Million, 2018 - 2030)
• UV Lamps
• Ballasts/Controller Units
• Quartz Sleeves
• Reactor Chambers
• Others
Regional Outlook (Revenue, USD Million, 2018 - 2030)
• North America
o U.S.
o Canada
o Mexico
• Europe
o Germany
o France
o U.K.
o Italy
o Spain
• Asia Pacific
o China
o India
o Japan
o South Korea
o Australia
• Central & South America
o Brazil
o Argentina
• Middle East & Africa
o South Africa
o UAE
TOC
Table and Figures
Methodology:
At MarketDigits, we take immense pride in our 360° Research Methodology, which serves as the cornerstone of our research process. It represents a rigorous and comprehensive approach that goes beyond traditional methods to provide a holistic understanding of industry dynamics.
This methodology is built upon the integration of all seven research methodologies developed by MarketDigits, a renowned global research and consulting firm. By leveraging the collective strength of these methodologies, we are able to deliver a 360° view of the challenges, trends, and issues impacting your industry.
The first step of our 360° Research Methodology™ involves conducting extensive primary research, which involves gathering first-hand information through interviews, surveys, and interactions with industry experts, key stakeholders, and market participants. This approach enables us to gather valuable insights and perspectives directly from the source.
Secondary research is another crucial component of our methodology. It involves a deep dive into various data sources, including industry reports, market databases, scholarly articles, and regulatory documents. This helps us gather a wide range of information, validate findings, and provide a comprehensive understanding of the industry landscape.
Furthermore, our methodology incorporates technology-based research techniques, such as data mining, text analytics, and predictive modelling, to uncover hidden patterns, correlations, and trends within the data. This data-driven approach enhances the accuracy and reliability of our analysis, enabling us to make informed and actionable recommendations.
In addition, our analysts bring their industry expertise and domain knowledge to bear on the research process. Their deep understanding of market dynamics, emerging trends, and future prospects allows for insightful interpretation of the data and identification of strategic opportunities.
To ensure the highest level of quality and reliability, our research process undergoes rigorous validation and verification. This includes cross-referencing and triangulation of data from multiple sources, as well as peer reviews and expert consultations.
The result of our 360° Research Methodology is a comprehensive and robust research report that empowers you to make well-informed business decisions. It provides a panoramic view of the industry landscape, helping you navigate challenges, seize opportunities, and stay ahead of the competition.
In summary, our 360° Research Methodology is designed to provide you with a deep understanding of your industry by integrating various research techniques, industry expertise, and data-driven analysis. It ensures that every business decision you make is based on a well-triangulated and comprehensive research experience.
• Product Planning Strategy
• New Product Stratergy
• Expanded Research Scope
• Comprehensive Research
• Strategic Consulting
• Provocative and pragmatic
• Accelerate Revenue & Growth
• Evaluate the competitive landscape
• Optimize your partner network
• Analyzing industries
• Mapping trends
• Strategizing growth
• Implementing plans
Covered Key Topics
Growth Opportunities
Market Growth Drivers
Leading Market Players
Company Market Share
Market Size and Growth Rate
Market Trend and Technological
Research Assistance
We will be happy to help you find what you need. Please call us or write to us:
+1 510-730-3200 (USA Number)
Email: sales@marketdigits.com